Preparation of β-hydroxyesters from isoxazolines. A selective Nibpy-catalyzed electrochemical method

An electrocatalytic method for the reductive N-O cleavage of isoxazolines is described. Ni⁰bpy, generated in situ, was used to promote selective ring opening of 3-methoxy-5-phenylisoxazoline (1a) and 3-methoxy-[4,5]cyclohexylisoxazoline (1b). DMF and NaI were used as solvent and supporting electrolyte, and β-hydroxyesters 2a and 2b were obtained in high yields respectively, after acid hydrolysis. β-Hydroxynitriles 3a and 3b were also identified as side products.     

Electrospray ionization quadrupole time-of-flight and matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometric analyses to solve micro-heterogeneity in post-translationally modified peptides from Phoneutria nigriventer (Aranea, Ctenidae) venom

Previous studies of the fractionated venom of the Brazilian armed spider Phoneutria nigriventer, obtained by gel filtration, have demonstrated the presence of a fraction PhM, a pool of small peptides (up to 2000 Da) that provoke contractions in smooth muscle of guinea pig ileum. Initial attempts to sequence these peptides were largely unsuccessful because of the low purification yield and the fact that the majority seemed to be blocked at their N-termini. In the present work, analysis of this venom fraction by mass spectrometry has revealed the existence of a highly complex mixture of peptides with molecular weights corresponding to those observed for the muscle-active peptides previously described (800-1800 Da). These peptides appear to be a family of isoforms with some particular features. The amino acid sequences of 15 isoforms have been determined by tandem mass spectrometry (MS/MS) using both electrospray ionization quadrupole time-of-flight mass spectrometry (ESI-Q/ToFMS) and matrix-assisted laser desorption/ionization tandem time-of-flight mass spectrometry (MALDI-ToF/ToFMS). These molecules contain post-translational modifications such as proteolysis and C-terminal amidation, which combine to generate additional isoforms. All the isoforms sequenced in this study possess an N-terminal pyroglutamic acid residue. A search for sequence similarities with other peptides in databanks revealed that these peptides are structurally related to the tachykinins, a family of neuro-hormone peptides. The data obtained in this study will be essential for the subsequent steps of this research, the synthesis of these peptides and pharmacological characterization of their biological activity.     

Effect of combining rules for cubic equations of state on the prediction of double retrograde vaporization

In this work, the phenomenon of double retrograde vaporization (DRV) is simulated using the Peng–Robinson equation of state with the classical mixing rules and several combining rules for the cross-energy and cross-co-volume parameters. The binary interaction parameters are set equal to zero in all cases, i.e., the calculations are entirely predictive. An interesting conclusion is that the predictions using the classical combining rules (geometric mean rule for a_ij and arithmetic mean rule for b_ij) provide the best agreement with the experimental data for all the systems tested: methane + n-butane, methane + n-pentane, ethane + limonene, and ethane + linalool. Another interesting observation is that several combining rules for b_ij, other than the arithmetic mean rule, predict the existence of three phases in equilibrium in a very narrow temperature range close to the critical temperature of methane in the methane + n-pentane system, even though, literature data indicates that n-hexane is the first n-alkane to present partial liquid phase immiscibility with methane.     

The effect of composition of parenteral solution on the thermal resistance of Bacillus stearothermophilus and Bacillus subtilis spores

Large-volume parenteral solutions were submitted to heat treatments after being inoculated with Bacillus stearothermophilus ATCC 7953 (T _r =121°C) and Bacillus subtilis ATCC 9372 (T _r =104.5°C) spores. The average decimal reduction time for B. stearothermophilus ranged from a D _121°C value of 1.31 to 3.14 min, in glucophysiologic and Ringer’s solutions respectively. For B. subtilis, D _104.5°C value increased from 0.69 to 1.37 min, in Ringer’s (pH=5.91) and 50% glucose (pH 3.05) solutions respectively. The z value ranged from 7.95°C (20% mannitol solution) to 13.14°C (50% glucose solution), corresponding to an activation energy (Ea) of 81.48 and 49.30 kcal/mol, respectively.     

Application of micellar electrokinetic chromatography to the quality control of a pharmaceutical preparation containing three bronchodilators

Theophylline(1,3-dimethylxanthine), dyphylline [7-(2,3-dihydroxypropyl)theophylline] and proxyphylline [7-(beta-hydroxypropyl)theophylline] are three bronchodilators administered jointly in a single pharmaceutical preparation used against asthma. A micellar electrokinetic chromatography (MEKC) method for their resolution using a background electrolyte consisting of 20 mM tetraborate at pH 8.5 and 100 mM sodium dodecyl sulfate is proposed. The method was used to determine the three active principles in a pharmaceutical preparation. The small amount of sample required and the expeditiousness of the procedure allow content uniformity to be determined in individual tablets. The values of the validation parameters for the method (viz. selectivity, linearity, accuracy, precision, limit of detection, limit of quantitation and robustness) are reported. A complete factor design (2(3)x2) including pH, the surfactant concentration and the ionic strength of the background electrolyte as factors was used to estimate robustness. Based on the results, the method is robust enough for quantitation purposes.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Multiple-steering QM-MM calculation of the free energy profile in chorismate mutase

A novel technique for computing free energy profiles in enzymatic reactions using the multiple steering molecular dynamics approach in the context of an efficient QM-MM density functional scheme is presented. The conversion reaction of chorismate to prephenate catalyzed by the Bacillus subtilis enzyme chorismate mutase has been chosen as an illustrative example.     

Preconcentration Systems Using Polyurethane Foam/Me-BDBD for Determination of Copper in Food Samples

A new reagent, 6-[2′-(6′-methyl-benzothiazolylazo)]-1,2-dihydroxy-3,5-benzenedisulfonic acid (Me-BDBD), was synthesised and used in on-line and off-line systems for copper preconcentration by solid-phase extraction. Spectrophotometry and Flame Atomic Absorption Spectrometry (FAAS) were the detection techniques. Polyurethane foam loaded with Me-BDBD packed in a minicolumn was used as sorbent in both systems. The spectral characteristics of Me-BDBD were investigated. The optimum pH values for maximum sorption of the metal are between 7.0 and 8.5. Copper was desorbed with 0.05 and 0.50 mol L⁻¹ hydrochloric acid solutions, for on-line and off-line systems, respectively. The effects of several foreign substances on the adsorption of copper are reported. The enrichment factors obtained were 7 (on-line) and 26 (off-line) for the systems. The proposed procedures allowed the determination of copper with detection limits of 3.4 and 1.4 μg L⁻¹ (0.85 and 0.35 μg per gram of sample) for on-line and off-line systems, respectively. The precision of the procedures was also calculated: 3.2 (on-line) and 1.9% (off-line). The validation of the procedures was carried out by analysis of certified reference material. The copper contents in corn and rice flour and black tea samples were determined by applying the proposed procedures.     

The influence of the shape of Au nanoparticles on the catalytic current of fructose dehydrogenase

Graphite electrodes were modified with triangular (AuNTrs) or spherical (AuNPs) nanoparticles and further modified with fructose dehydrogenase (FDH). The present study reports the effect of the shape of these nanoparticles (NPs) on the catalytic current of immobilized FDH pointing out the different contributions on the mass transfer–limited and kinetically limited currents. The influence of the shape of the NPs on the mass transfer–limited and the kinetically limited current has been proved by using two different methods: a rotating disk electrode (RDE) and an electrode mounted in a wall jet flow-through electrochemical cell attached to a flow system. The advantages of using the wall jet flow system compared with the RDE system for kinetic investigations are as follows: no need to account for substrate consumption, especially in the case of desorption of enzyme, and studies of product-inhibited enzymes. The comparison reveals that virtually identical results can be obtained using either of the two techniques. The heterogeneous electron transfer (ET) rate constants (k_S) were found to be 3.8 ± 0.3 s⁻¹ and 0.9 ± 0.1 s⁻¹, for triangular and spherical NPs, respectively. The improvement observed for the electrode modified with AuNTrs suggests a more effective enzyme-NP interaction, which can allocate a higher number of enzyme molecules on the electrode surface.

The shape of gold nanoparticles has a crucial effect on the catalytic current related to the oxidation of D-(-)-fructose to 5-keto-D-(-)-fructose occurring at the FDH-modified electrode surface. In particular, AuNTrs have a higher effect compared with the spherical one.

     

31P{1H}-n.m.r. as a tool for identification of ruthenium isomers containing PPh3 or 1,4-bis(diphenylphosphino)butane ligands. X-ray structures of the cis-{RuCl2(PPh3)2 [4,4′-(-X)2-2,2′-bipy]} complexes [X=-H, -Me, -SMe and (-Cl, -Me)]

A series of cis-{RuCl₂(PPh₃)₂[4,4-(X)₂-2,2-bipy]} [cis-chlorines; X=-H, -Me, -SMe, and (-Cl,-Me)] complexes have had their structures determined by single crystal X-ray diffraction. The geometry of these complexes, also determined in CH₂Cl₂ solution by ³¹P{¹H}-n.m.r. spectroscopy, showed that the chemical shifts for the phosphorus atoms are slightly dependent on the pKa of the 4,4-(-X)₂-2,2-bipy ligands.